Hello,

Just spent a good week installing my home server. Time to pause and lookback to what I’ve setup and ask your help/suggestions as I am wondering if my below configuration is a good approach or just a useless convoluted approach.

I have a Proxmox instance with 3 VLAN:

  • Management (192.168.1.x) : the one used by proxmox host and that can access all other VLANs

  • Servarr (192.168.100.x) : every arr related software + Jellyfin (all LXC). All outbound connectivity goes via VPN. Cant access any VLAN

  • myCloud (192.168.200.X): WIP, but basically planning to have things like Nextcloud, Immich, Paperless etc…

The original idea was to allow external access via Cloudlfare tunnel but finally decided to switch back to Tailscale for “myCloud” access (as I am expected to share this with less than 5 accounts). So:

  • myCloud now has Tailscale running on it.
  • myCloud can now access Servarr VLAN

Consequently to my choice of using tailscale, I had now to use a DNS server to resolve mydomain.com:

  • Servarr now has pihole as DNS server reachable across all VLAN

On the top of all that I have yet another VLAN for my raspberry Pi running Vaultwarden reachable only via my personal tailscale account.

I’m open to restart things from scratch (it’s fun), so let me know.

Also wondering if using LXCs is better than docker especially when it comes to updates and longer term maintenance.

  • curbstickle@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    13 days ago

    That’s not how any of this works… At all.

    No, its managed by the firewall. The existence of a VLAN does not grant it access to egress. The firewall needs to permit that behavior.

    Your entire understanding of how a logical network works is wrong. I’m not trying to be a dick - this is just really bad information that you’re sharing.

    • just_another_person@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      2
      ·
      edit-2
      13 days ago

      JFC 🤦

      How are you NOT understanding what OP thinks is happening, versus what you thinks is happening?

      If I get shell access to this router I have access to ALL NETWORKS. VLAN won’t help any of this.

      • curbstickle@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        2
        ·
        13 days ago

        HOW WOULD YOU GET SHELL ACCESS TO HIS ROUTER FROM A FIREWALLED OFF VLAN THAT DOES NOT GAIN ACCESS TO THE MANAGEMENT VLAN THE ROUTER IS ON.

        Holy crap dude.

        BASIC networking.

              • curbstickle@lemmy.dbzer0.com
                link
                fedilink
                English
                arrow-up
                2
                arrow-down
                1
                ·
                edit-2
                13 days ago

                Take a networking class. You have numerous fundamental misunderstandings and make wild assumptions on bridging gaps that has specific requirements to occur, which also requires a complete lack of any other security methods.

                Take a networking class, please. You need it.

                Edit: You’re mad and still down voting, I want to point out you dont even understand the link you provided.

                You should probably read that. But looooooong before then, you should take an actual class on networking.

                You need it.

      • curbstickle@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        1
        ·
        13 days ago

        Thats my line.

        I’m also done having any sort of discussion with you, there is a fundamental misunderstanding of logical network design here, and I have no interest in correcting that. Enjoy your day.