Edit: so it turns out that every hobby can be expensive if you do it long enough.

Also I love how you talk about your hobby as some addicts.

  • choss@lemmy.ml
    link
    fedilink
    arrow-up
    0
    ·
    1 year ago

    I would love to read about this $20 weather station! Do you maybe have a link?

    • 👍Maximum Derek👍@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      Mine is pretty basic but is built on the shoulders of giants. Also that $20 was from pre-pandemic / pre-chip shortage prices. I’m guessing it’s more like $35 now, or maybe high $20s from ali express.

      I use Home Assistant for home automation. It has a now official addon called ESPHome for easily configuring esp devices and adding them to Home Assistant.

      I bought some cheap dev boards off amazon and thankfully they worked
          an esp8266 microcontroller with IC2 headers and a microusb port already onboard
          a bmp280 that measures temp, humidity, and barometric pressure
          a lux sensor with a plastic dome over the top
      I soldered them together on a prototyping board
      

      All the components were supported by esphome, so I just needed to write the device config and then flash the devboard via esphome (in a web browser) over the built in usb.

      I 3d printed a housing for it, but you can also buy boxes. It needs airflow but also needs to stay dry. You can use a spray sealant to help avoid corrosion from ambient humidity. I skipped that step because I want to see how quickly it becomes problematic… and I should probably check on that.

      • gregoryw3@lemmy.ml
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Just an fyi bmp280 is not real temperature but an estimation based on air pressure.