There’s a Suzuki DL650 that haven’t been started in six years. I’m slowly working to get it running again, and cleaning rust deposits out of the tank is the current goal. My hand is too big to fit in the hole so I made a thing.
There’s a Suzuki DL650 that haven’t been started in six years. I’m slowly working to get it running again, and cleaning rust deposits out of the tank is the current goal. My hand is too big to fit in the hole so I made a thing.
That’s pretty much what I did. 5L of 10% vinegar plus some water ate almost everything away. Now my problem is 11 pinholes and a leaking seam…
This is where JB weld and or soldering it up would be the order
I’ve also heard good reports about a supposed thin lacquer like coating that you can apply to the interior of the tank and then let that flash off and dry to help it seal it. But I have never personally used so I cannot actually State the effectiveness of any of those.