snf@lemmy.world to Dull Men's Club@lemmy.worldEnglish · edit-226 天前Rewired an old fluorescent tube fixture for LED with a ballast deletelemmy.worldimagemessage-square14linkfedilinkarrow-up1100arrow-down13file-text
arrow-up197arrow-down1imageRewired an old fluorescent tube fixture for LED with a ballast deletelemmy.worldsnf@lemmy.world to Dull Men's Club@lemmy.worldEnglish · edit-226 天前message-square14linkfedilinkfile-text
minus-squaresnf@lemmy.worldOPlinkfedilinkarrow-up4·26 天前The diagram I originally referred to was on the packaging for the tubes I bought (GE Direct Wire 96" T8), but it’s basically this: https://manuals.plus/wp-content/uploads/2023/01/GE-current-LEDL136-LED-Double-Ended-Type-B-T8-Tubes-FIG-3.png In my case (double-ended lamps, 6 ballast wires, right side of the diagram above) the fuse goes between the hot and the red/blue wires leading to the sockets. I’ve actually got two of them since the fixture has 4 tubes in it. Hope this helps!
The diagram I originally referred to was on the packaging for the tubes I bought (GE Direct Wire 96" T8), but it’s basically this:
https://manuals.plus/wp-content/uploads/2023/01/GE-current-LEDL136-LED-Double-Ended-Type-B-T8-Tubes-FIG-3.png
In my case (double-ended lamps, 6 ballast wires, right side of the diagram above) the fuse goes between the hot and the red/blue wires leading to the sockets. I’ve actually got two of them since the fixture has 4 tubes in it. Hope this helps!
Much obliged!